This Y-type servo splitter wiring harness features a single SM 2.54mm 3Pin male plug on one end, branched into two separate SM 3Pin female sockets, adopting universal red-black-white color coded signal wires for RC servo systems. The split junction is wrapped with thick heat shrink tubing to reinforce wire fixation and prevent internal copper wire fracture during frequent twisting and flight vibration.
All terminals are precision machine crimped for stable signal transmission without intermittent control failure. Compatible with all standard RC servo motors, ESC flight controllers and radio receivers, widely used to realize dual-servo synchronous linkage for aircraft ailerons, vehicle steering and robot steering mechanisms. Each finished cable passes continuity and pull force testing before delivery.
| Connector Standard | SM 2.54mm pitch,3Pin male to dual 3Pin female Y splitter |
| Standard Wire | 26AWG PVC stranded wire |
| Working Temperature | -20℃ to +80℃ |
| Reinforcement Design | Heat shrink tube wrapped Y-branch joint |
| Complicance & Custom | RoHS,REACH;custom wire length,silicone wire upgrade |
Advantages
1-to-2 Y split design: Single receiver channel drives two servos simultaneously, simplifies internal wiring layout of RC models.
Heat shrink reinforced branch junction: Effectively prevents wire cracking and short circuit caused by long-term bending vibration of drones.
Standard SM 2.54 3Pin universal interface: Compatible with nearly all mainstream RC servos, flight controllers and remote receivers.
Color-coded triple wire layout: Red power, black ground, white signal for quick and error-free assembly identification.
Firm crimped SM terminals: High pull resistance avoids loose contact during high-speed flight and vehicle bumping.
Flexible custom options: Support longer/ shorter cable length, upgrade to soft silicone wire for high-performance racing models.
Application Scenarios
FPV & Fixed-Wing Aircraft: Dual aileron servo synchronous control, elevator twin servo splitter wiring
RC Off-Road Vehicles: Dual steering servo linkage cable, crawler truck differential servo extension wire
Multi-Rotor Drones: Gimbal dual servo signal splitter, auxiliary steering gear branch harness
Educational Robot Models: Robot arm double servo control wiring, coding toy steering signal cable
RC Hobby Modification: Flight controller multi-servo expansion auxiliary jumper cords
FAQ
Q1: What connector pitch does this Y servo splitter use?
A: It adopts SM series 2.54mm standard 3Pin connectors, the most universal interface for RC servo motors.
Q2: Can this cable drive two large torque servos at the same time?
A: Mainly used for signal synchronous transmission; for high-torque servos, extra power supply is recommended to avoid insufficient current.
Q3: Is the Y split position reinforced to prevent wire breakage?
A: The branch junction is fully wrapped with heat shrink tubing to strengthen wire fixation and resist repeated bending fatigue.
Q4: Can I customize different cable lengths for my drone project?
A: Multiple standard lengths in stock, and any custom length can be produced for bulk hobby factory orders.
Q5: Does this splitter work for all brands of RC servos?
A: Yes, standard 3Pin SM 2.54 pinout matches most mainstream servo brands such as SG90, MG996R and digital servos.
