You are here: Home / Products / Wiring Harness / Wire Harness Assembly / Wire Harness Assembly / SMK CFX2302 0200F Wire to Board Connector 1.0mm Pitch Mobile Electronics Cable

SMK CFX2302 0200F 1.0mm Pitch Mobile Electronics Cable

SMK CFX2302 0200F Wire to Board Connector 1.0mm Pitch Mobile Electronics Cable

This precision miniature wire-to-board harness adopts original SMK CFX2302-0200F 2P low-profile plug connector with 1.0mm ultra-fine pitch, belonging to SMK ID-01 series compact mobile dedicated connectors.The mating height is only 1.2mm, ultra-small overall dimensions (3mm L × 2.2mm W × 1mm H), specially developed for internal narrow-space wiring of smartphones, tablets, smart watches and wearable devices. It adopts IDC insulation displacement crimp process, two-point gold-plated contact structure with built-in elastic click lock and reverse insertion prevention ribs, strong anti-drop and anti-vibration performance to resist daily drop impact of mobile equipment. Matched ultra-fine AWG32 flexible electronic wire, stable transmission of low-current battery power and miniature sensor signals, fully RoHS & halogen-free compliant. Customizable wire length, wire color, shielding and terminal processing are supported, widely used for wearable battery connection, mobile camera auxiliary signal, touch sensor and portable mini consumer electronic internal circuit bridging.

Model:
SMK CFX2302-0200F
Brand:
huamao

Availability:

Quantity:



Inquire Add to Basket Buy at Amazon

SMK CFX2302 Cable 1.0mm Pitch Connector Mobile Device Terminal Wire CFX2302 0200F Cable SMK Mobile Terminal Wire CFX2302 Smartphone Cable SMK 1.0mm Pitch Cable CFX2302 Connector Cable

Product Description

The ultra-flat low-profile structure greatly saves PCB vertical stacking space inside slim mobile phones and smart wearables, solving the thickness limitation pain point of large-height traditional connectors. The integrated molded click lock generates obvious tactile feedback after full mating, avoiding incomplete insertion caused by assembly misoperation leading to intermittent power failure of wearable batteries. The built-in physical anti-reverse polarization ribs only allow one correct docking direction, eliminating short-circuit burnout risks of mainboard chips during mass production assembly. The IDC piercing process removes wire stripping steps, greatly improving mass assembly efficiency for electronics factories. Multi-strand ultra-thin wire has excellent bending fatigue resistance, adapting to frequent folding and swing of wearable watch straps and flip mobile phone modules. All IDC crimp joints are reinforced with molded strain relief to prevent wire core fracture at the connector root.

Every finished miniature harness passes strict factory testing before shipment, including continuity test, terminal pull retention force test, drop vibration aging screening, low-temperature bending cycle test and signal stability long-time aging test. We supply fixed-length finished battery/sensor jumper wires and cross-series conversion cables for smartphone OEM manufacturers, wearable smart device brands and portable medical mini monitoring equipment R&D teams.

Specifications

Connector Part Number	SMK CFX2302-0200F
Connector Series	SMK ID-01 ultra-low profile mobile dedicatedd series
Pitch	1.0mm single-row ultra-fine compact pitch
Connection Process	IDC insulation displacement piercing crimping
Matching Wire Gauge	AWG32 ultra-fine multi-strand tinned copper conductor

Advantages

Ultra-slim 1.2mm low-profile miniaturized design: The industry-leading ultra-low mating height effectively reduces internal stacking thickness of slim smartphones and smart watches, perfectly matching thin lightweight mobile product miniaturization layout demands that ordinary 1.0mm connectors cannot meet.
Dual-point gold-plated IDC contact anti-vibration & anti-drop performance: Two independent elastic contact surfaces maintain stable low resistance even under repeated drop impact and daily jitter of wearable equipment, avoid sudden power-off failure of watch batteries caused by single-point contact fatigue.
Front & rear double crimp slot wire locking structure: Separate double fixing positions for wire insulation and conductor, stronger tensile resistance than single crimp IDC terminals, no wire shedding after thousands of strap bending cycles of smart watches.
Built-in click lock + full physical anti-misplug dual safety protection: Obvious tactile locking feedback to judge full mating; integrated positioning ribs completely block reversed insertion, drastically reduce chip short-circuit defective rate during mobile equipment mass assembly.
Ultra-fine AWG32 lightweight flexible wire matching: Slim wire outer diameter occupies minimal internal equipment space, multi-strand soft copper core withstands tens of thousands of reciprocating bending without core breakage, ideal for foldable mobile and wrist wearable moving parts wiring.
Wearable & mobile electronics targeted lightweight customization service: Support ultra-short 0.03m built-in watch battery ultra-short jumper wires and extended 2m portable detection equipment signal cables, small batch prototype sample orders available for new smart wearable and mini mobile device development verification.

Application

Smart Watch & Wrist Wearable Devices:Smart watch built-in lithium battery power connection harness, wearable blood oxygen heart rate sensor signal thin cable, sports bracelet vibration motor control jumper wire, foldable smart watch hinge internal ultra-thin wiring assembly
Smartphone & Flip Mobile Terminals:Mobile phone small auxiliary camera power signal cable, flip screen hinge thin sensor wiring harness, rear fingerprint module detection connecting wire, phone side touch key low-current signal ultra-fine cable
Tablet & Portable Mini Consumer Electronics:Tablet front proximity light sensor thin wire, mini Bluetooth headset charging compartment battery connecting harness, portable wireless charging module internal power jumper cable, handheld portable mini fan control signal cable
Compact Portable Medical Monitoring Equipment:Mini wearable body temperature patch sensor signal harness, pocket blood glucose meter internal battery connecting thin wire, portable sleep monitoring bracelet low-power wiring assembly
Small Smart Home Miniature Sensing Modules:Mini human body induction night light battery power thin cable, portable air quality detector sensor signal harness, mini wireless smart door lock internal ultra-fine connecting wire

FAQ

Q1: What are the core size parameters of SMK CFX2302-0200F connector?

A: It is a 2Pin wire-to-board plug with 1.0mm pitch, ultra-low 1.2mm mating height, overall housing dimension 3mm × 2.2mm × 1mm, specially designed for ultra-thin mobile electronic equipment internal wiring.

Q2: What is the maximum continuous current each pin can carry?

A: Rated 1A single-pin continuous current under 30V low voltage circuit, only applicable to wearable battery power and miniature sensor weak signal circuits, not for high-power load loops.

Q3: Why adopt dual-point contact structure compared with single-point IDC connectors?

A: Double elastic contact surfaces disperse vibration and drop impact stress, greatly improve contact stability, solve the common problem of intermittent power failure of wearable watch batteries after long-term daily wear and collision.

Q4: Can this thin cable withstand frequent bending of watch straps and flip phones?

A: Matched AWG32 multi-strand ultra-fine flexible wire, passed tens of thousands of reciprocating bending fatigue tests, stable conduction for long-term swing moving parts of wearable and flip mobile devices.