06XSR‑36S belongs to JST XSR series, world‑class ultra‑miniature 0.6 mm pitch IDC (Insulation Displacement Contact / piercing‑type) wire‑to‑board connector.This finished harness adopts solder‑free IDC piercing crimping process, no soldering required; U‑slot contact pierces wire insulation to form stable electrical connection with conductor core.
6‑position (6‑pin) receptacle housing, extremely small outline, PCB stacked height only 1.45 mm, depth 3.0 mm, greatly saves internal space of micro‑UAV / FPV drone equipment.Match ultra‑thin lightweight UL10064 thin‑wall wire (32‑36 AWG), effectively reduce whole‑machine weight. Mainly transmits weak signals for flight‑controller, gyroscope IMU, GPS module, miniature optical flow sensor inside small‑size UAV. Support custom wire length, pin‑count (2‑22P), double‑ended XSR connectors, open tin‑dipped ends, comply with RoHS‑2.0 and UL standards.
Specification
| Connector Model | 06XSR‑36S (XSR series) |
| Pitch | 0.6 mm |
| Pin Count | 6‑Position (6‑Circuit) |
| Rated Voltage | 30 V AC / DC |
| Mated PCB Height | 1.45 mm ultra‑low profile |
| Operating Temperature | ‑25 ℃ ~ +85 ℃ |
| Applicable Wire | 32‑36 AWG UL10064 ultra‑thin electronic wire |
Advantages
0.6 mm Ultra‑Fine Pitch, Micro‑Size Light‑Weight
Only 1.45 mm mating height, tiny footprint, ultra‑thin fine wire greatly reduces cable weight, critical for weight‑sensitive micro‑drone / FPV UAV equipment.
IDC Solder‑Free Piercing Connection
Adopts JST twin U‑slot insulation displacement contacts; no soldering needed, consistent contact performance, suitable for large‑volume automated harness production.
Built‑In Strain‑Relief Anti‑Pull‑Out
Special housing strain‑relief structure prevents wire breakage under drone flight vibration and shaking, improves anti‑vibration reliability for airborne equipment.
Compact PCB Space‑Saving Layout
Compared to 0.8 mm pitch connectors, saves ~60 % PCB surface area, ideal for high‑density layout of mini flight‑controller boards.
Flexible Customization Service
Support custom wire length, different XSR pin‑count (2‑22P), double‑ended XSR cable, tin‑dipped processing for different UAV sensor module demands.
Stable Weak‑Signal Transmission
Tin‑plated IDC contacts keep low contact resistance; reliable for IMU gyro, GPS, optical‑flow and other drone low‑voltage signal transmission.
Application
Micro / FPV UAV Drone Equipment
Mini drone flight‑controller internal signal wiring, IMU gyroscope, GPS, optical‑flow sensor connecting harness.
Miniature Wearable Electronic Devices
Wearable equipment internal micro‑sensor signal wire‑to‑board interconnection.
Portable Mini Medical Instruments
Compact portable diagnostic device internal micro‑module signal harness.
Small‑size Smart Hardware & Audio Devices
Tiny smart module, miniature speaker internal wiring.
Compact IoT Sensing Modules
High‑density small‑size sensor PCB internal signal interconnection.
FAQ
Q1: What is 06XSR‑36S?
A: 06XSR‑36S is the 6‑pin cable‑side IDC receptacle housing of JST XSR 0.6 mm‑pitch series, uses solder‑free piercing connection for ultra‑thin 32‑36 AWG wires.
Q2: Which PCB header does 06XSR‑36S mate with?
A: Matches JST SM06B‑XSRS‑ETB SMT vertical surface‑mount male header (board side).
Q3: Can this XSR harness carry power for drone motors?
A: No. Rated only 0.2 A per pin, purely for weak‑signal circuits (IMU, GPS, sensors). Do NOT apply to motor power or high‑current loops.
Q4: What wire gauge should be selected for drone use?
A: Micro‑drone signal harness usually uses 32AWG‑34AWG UL10064 thin‑wall wire, to balance weight and mechanical strength.
Q5: Is this harness shock‑proof for drone flight vibration?
A: The housing has built‑in strain‑relief, but it is an indoor component, not waterproof. For UAV applications, avoid large‑amplitude repeated bending, and route cables with proper fixation.
