GH1.25
JST
| Availability: | |
|---|---|
| Quantity: | |
Twisted pair wire layout eliminates EMI crosstalk between motor power circuits and weak navigation signals, solving the common problem of flight position drift caused by motor interference. The high-temperature silicone outer sheath does not harden, crack or deform under continuous heat accumulation inside the drone frame after full-throttle flight, far superior to ordinary PVC wires that become brittle at high temperature. The GH1.25 built-in elastic lock provides strong clamping force to avoid accidental disconnection during high-speed aerial vibration and aerial maneuvers, preventing flight loss of control risks caused by loose signal plugs. Multi-color coded twisted cores clearly separate gyroscope, GPS, ESC PWM and power signal channels to simplify drone assembly and maintenance wiring sorting. All crimp transition points are wrapped with heat shrink tubing for strain relief to eliminate wire core fracture at the connector root after thousands of flight vibration cycles.
Every finished flight control harness passes strict factory testing before shipment, including continuous high-temperature aging test, 500-hour flight simulation vibration screening, reciprocating bending fatigue test and weak signal anti-interference stability test. We supply fixed-length airborne jumper cables and customized multi-channel conversion wiring for FPV drone manufacturers, agricultural UAV R&D teams and industrial inspection aerial equipment suppliers.
Specifications
| Connector Model | GH1.25-9P single roe wire to board connector |
| Housing Material | High heat resistant PBT resin |
| Applicable Wire Gauge | AWG28/AWG30 |
| Cable Insulation Material | High-temperature flexible silicone rubber |
| Cable Operating Temperature Range | -60℃ to +200℃ |
Advantages
+200℃ ultra-high temperature resistant silicone twisted cable: Adapt to long-term heat accumulation inside drone frames generated by ESCs and lithium batteries, no hardening, cracking or insulation aging, stable signal transmission even under sustained high-load flight conditions.
Full twisted core anti-electromagnetic interference design: Independent twisted wire layout greatly suppresses EMI noise from brushless motors and switching power supplies, effectively avoid GPS position drift, gyro signal jitter and flight control misjudgment faults of UAVs.
GH1.25 integrated anti-drop locking safety structure: Tactile elastic lock buckle tightly locks the connector after full insertion, will not loosen or separate under high-speed flight vibration and aerial maneuver impact, eliminate flight loss-of-control hidden dangers caused by loose signal plugs.
Built-in physical anti-reverse misplug protection: Molded positioning ribs on the GH housing only allow correct directional docking, avoid mainboard chip burnout caused by reversed plugging during drone mass assembly and field maintenance.
Ultra-fine lightweight twisted wire miniaturization design: Slim AWG28/AWG30 silicone wire reduces overall airborne wiring weight, critical for multi-rotor UAV load control; soft multi-strand conductor withstands tens of thousands of bending cycles without core breakage inside narrow drone frame cavities.
UAV flight control exclusive flexible customization service: Support ultra-short 0.05m built-in flight control board internal wiring and 3m long-distance gimbal/GPS extension cables, small batch prototype sample orders available for new FPV and industrial inspection drone development verification.
Application
FPV Racing & Freestyle Drones:5-inch FPV quadcopter flight control mainboard multi-channel signal twisted harness, racing drone ESC PWM control silicone cable, mini whoop drone optical flow sensor GH1.25 connecting wire, freestyle drone gyroscope vibration resistant signal cable
Large Agricultural Spraying Multi-Rotor UAV:Agricultural drone flight control to ESC multi-core twisted silicone wiring harness, pesticide spraying UAV altitude pressure detection sensor high-temperature cable, large load multi-rotor GPS positioning anti-interference signal assembly
Aerial Photography & Survey Industrial Inspection Drones:Mapping survey drone flight control-GPS integrated twisted silicone cable, power line inspection UAV gimbal stabilization control GH1.25 9Pin harness, mountain aerial photography long-distance airborne sensor extension wire
Fixed-Wing VTOL Vertical Takeoff UAVs:VTOL drone flight control multi-sensor high-temperature resistant wiring, fixed-wing aircraft motor ESC anti-vibration twisted silicone cable, survey drone wind speed detection thin signal harness
Educational & Student Training Mini Drones:Teaching programmable drone flight control signal connecting wire, student experiment multi-rotor GH1.25 sensor twisted cable, small indoor training drone lightweight high temp silicone wiring assembly
FAQ
